data sheet emc/emi chokes rn series current-compensated chokes rated currents from 0.3 to 10 a dc to 1khz frequency 100khz to 3mhz common-mode resonance frequency dual-choke configurations multiple pcb-mounting options technical specifications flammability corresponding to ul 94 v-0 high potential test voltage winding-to-housing @ 25c 4000 vac, 60 sec, guaranteed winding-to-winding @ 25c 1500 vac, 60 sec, guaranteed 1500 v, 50 hz, 2 sec, factory test maximum continuous operating voltage 250 vac mtbf @ 40c/230v (mil-hb-217f) > 5,000,000 hours operating frequency 50/60 hz rated currents 0.3 to 10 a @ 40 c max. surge current @ 10msec 20 x inominal @ 25c temperature range (operation and storage) -40 c to +125 c (40/125/56) approvals vde: excluding rn 102, rn 202 rn chokes are attenuating common-mode or asymmetric (p/n C> e) interference signals, by bein g connected in series with the phase and neutral line s of an ac powerline input. symmetrical components of the noise are also attenuated by the leakage inductance of the windings. these chokes are typically used in conjunction with suppression capacitors. features and benefits high saturation resistance and excellent thermal behavior through hole pin connections dual-choke configuration small compact design multiple housing options custom-specific versions are available on request typical applications phase-angle control circuits in combination with saturating chokes emi input filters for suppressing equipment with no earth connection suppressing high interference levels typical electrical schematic emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn x02-0.3-02 0.3 12 1275 2 -02 2 3 rn x02-0.6-02 0.6 4.4 385 2 -02 2 3 rn x02-1-02 1 3 205 2 -02 2 3 rn x02-1.5-02 1.5 1.6 100 2 -02 2 3 rn x02-2-02 2 1.1 70 2 -02 2 3 rn x12-0.4-02 0.4 39 1460 2 -02 5 6 rn x12-0.5-02 0.5 27 1250 2 -02 5 6 rn x12-0.6-02 0.6 15 465 2 -02 5 6 rn x12-0.8-02 0.8 10 370 2 -02 5 6 rn x12-1.2-02 1.2 6.8 245 2 -02 5 6 rn x12-1.5-02 1.5 3.3 135 2 -02 5 6 rn x12-2-02 2 1.8 75 2 -02 5 6 rn x12-4-02 4 0.7 27 2 -02 5 6 rn x14-0.3-02 0.3 47 1750 2 -02 9 12 rn x14-0.5-02 0.5 39 810 2 -02 9 12 rn x14-0.8-02 0.8 27 500 2 -02 9 12 rn x14-1-02 1 15 375 2 -02 9 12 rn x14-1.2-02 1.2 10 200 2 -02 9 12 rn x14-1.5-02 1.5 6.8 130 2 -02 9 12 rn x14-2-02 2 4.2 102 2 -02 9 12 rn x14-2.5-02 2.5 3.3 72 2 -02 9 12 rn x14-3-02 3 2 55 2 -02 9 12 rn x14-4-02 4 1.5 35 2 -02 9 12 rn x22-0.6-02 0.6 47 1180 2 -02 17 21 rn x22-0.8-02 0.8 39 1000 2 -02 17 21 rn x22-1-02 1 18 610 2 -02 17 21 rn x22-1.5-02 1.5 10 220 2 -02 17 21 rn x22-2-02 2 6.8 147 2 -02 17 21 rn x22-2.5-02 2.5 5.6 105 2 -02 17 21 rn x22-3-02 3 4.5 80 2 -02 17 21 rn x22-4-02 4 3.3 45 2 -02 17 21 rn x42-0.5-02 0.5 82 2700 2 -02 32 32 rn x42-1-02 1 33 810 2 -02 32 32 rn x42-1.4-02 1.4 27 500 2 -02 32 32 rn x42-2-02 2 6.8 190 2 -02 32 32 rn x42-4-02 4 3.3 66 2 -02 32 32 rn x42-6-02 6 1.8 20 2 -02 32 32 emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn 143-0.5-02 0.5 100 2900 2 -02 33 rn 143-1-02 1 47 880 2 -02 33 rn 143-2-02 2 10 230 2 -02 33 rn 143-4-02 4 3.9 58 2 -02 33 rn 143-6-02 6 1.8 20 2 -02 33 rn 152-1-02 1 68 1300 2 -02 54 rn 152-2-02 2 18 350 2 -02 54 rn 152-4-02 4 6.8 87 2 -02 54 rn 152-6-02 6 3.9 41 2 -02 54 rn 152-8-02 8 2.7 22 2 -02 54 rn 152-10-02 10 1.8 14 2 -02 54 * replace the x by the desired housing style type 1 or 2. 1: choke horizontal 2: choke vertical test conditions: measuring frequency: 10 khz; 5 ma < 16h; 500a > 1 6h < 160h; 50a > 160h < 16mh; 50mv > 16mh < 160 mh inductance tolerance: +50%, -30% resistance tolerance: max. 15% @ 25 c; 20m, 1 a; > 20m 200m, 100ma; > 200m 2, 10ma electrical characteristics @ 25 c: 2c typical choke attenuation/resonance frequency chara cteristics per cispr 17; 50 /50 asym rn x02 rn x12 rn x14 rn x22 rn x42 rn 143 rn 152 emc/emi products schaffner group datasheets 2014 typical saturation characteristics inductance (typical value in %) vs. nominal current (a dc) rn x02 / rn x12 / rn x14 / rn x22 rn x42 / rn 143 / rn 152 mechanical data rn 102 rn 112, rn 114, rn 122, rn 142, rn 143 rn 202 rn 212, rn 214, rn 222, rn 242 rn 152 emc/emi products schaffner group datasheets 2014 dimensions rn 102 rn 112 rn 114 rn 122 rn 202 rn 212 rn 214 rn 222 rn 142 rn 143 rn 242 rn 152 tol. a 14 17.1 21.5 27 8.8 12.5 15.5 18 32.5 32.5 18 41.8 0.3 b 14 17.7 22.5 28 18.2 18 23 31 33.1 33.1 31 43 0.3 c 9 12.6 13.2 16.5 13.5 20 25 29.3 19.7 19.7 34.3 25 0.3 d 4 4 4 4 4.5 4 4 4 4.3 4.3 4.2 4.5 0.5 e 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.2 0. 1 f 2 2 1.5 2 g 10 10 12.5 15 5.08 10 12.5 15 20 20 15 15 0.2 h 10 15 20.1 25 15.21 15 10 12.5 30 30 12.5 40 0.2 i 4 8 l 12 12 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m please visit www.schaffner.com to find more details on filter co nnections. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
2 data sheet emc/emi chokes rn series current-compensated chokes rated currents from 0.3 to 10 a dc to 1khz frequency 100khz to 3mhz common-mode resonance frequency dual-choke configurations multiple pcb-mounting options technical specifications flammability corresponding to ul 94 v-0 high potential test voltage winding-to-housing @ 25c 4000 vac, 60 sec, guaranteed winding-to-winding @ 25c 1500 vac, 60 sec, guaranteed 1500 v, 50 hz, 2 sec, factory test maximum continuous operating voltage 250 vac mtbf @ 40c/230v (mil-hb-217f) > 5,000,000 hours operating frequency 50/60 hz rated currents 0.3 to 10 a @ 40 c max. surge current @ 10msec 20 x inominal @ 25c temperature range (operation and storage) -40 c to +125 c (40/125/56) approvals vde: excluding rn 102, rn 202 rn chokes are attenuating common-mode or asymmetric (p/n C> e) interference signals, by bein g connected in series with the phase and neutral line s of an ac powerline input. symmetrical components of the noise are also attenuated by the leakage inductance of the windings. these chokes are typically used in conjunction with suppression capacitors. features and benefits high saturation resistance and excellent thermal behavior through hole pin connections dual-choke configuration small compact design multiple housing options custom-specific versions are available on request typical applications phase-angle control circuits in combination with saturating chokes emi input filters for suppressing equipment with no earth connection suppressing high interference levels typical electrical schematic emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn x02-0.3-02 0.3 12 1275 2 -02 2 3 rn x02-0.6-02 0.6 4.4 385 2 -02 2 3 rn x02-1-02 1 3 205 2 -02 2 3 rn x02-1.5-02 1.5 1.6 100 2 -02 2 3 rn x02-2-02 2 1.1 70 2 -02 2 3 rn x12-0.4-02 0.4 39 1460 2 -02 5 6 rn x12-0.5-02 0.5 27 1250 2 -02 5 6 rn x12-0.6-02 0.6 15 465 2 -02 5 6 rn x12-0.8-02 0.8 10 370 2 -02 5 6 rn x12-1.2-02 1.2 6.8 245 2 -02 5 6 rn x12-1.5-02 1.5 3.3 135 2 -02 5 6 rn x12-2-02 2 1.8 75 2 -02 5 6 rn x12-4-02 4 0.7 27 2 -02 5 6 rn x14-0.3-02 0.3 47 1750 2 -02 9 12 rn x14-0.5-02 0.5 39 810 2 -02 9 12 rn x14-0.8-02 0.8 27 500 2 -02 9 12 rn x14-1-02 1 15 375 2 -02 9 12 rn x14-1.2-02 1.2 10 200 2 -02 9 12 rn x14-1.5-02 1.5 6.8 130 2 -02 9 12 rn x14-2-02 2 4.2 102 2 -02 9 12 rn x14-2.5-02 2.5 3.3 72 2 -02 9 12 rn x14-3-02 3 2 55 2 -02 9 12 rn x14-4-02 4 1.5 35 2 -02 9 12 rn x22-0.6-02 0.6 47 1180 2 -02 17 21 rn x22-0.8-02 0.8 39 1000 2 -02 17 21 rn x22-1-02 1 18 610 2 -02 17 21 rn x22-1.5-02 1.5 10 220 2 -02 17 21 rn x22-2-02 2 6.8 147 2 -02 17 21 rn x22-2.5-02 2.5 5.6 105 2 -02 17 21 rn x22-3-02 3 4.5 80 2 -02 17 21 rn x22-4-02 4 3.3 45 2 -02 17 21 rn x42-0.5-02 0.5 82 2700 2 -02 32 32 rn x42-1-02 1 33 810 2 -02 32 32 rn x42-1.4-02 1.4 27 500 2 -02 32 32 rn x42-2-02 2 6.8 190 2 -02 32 32 rn x42-4-02 4 3.3 66 2 -02 32 32 rn x42-6-02 6 1.8 20 2 -02 32 32 emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn 143-0.5-02 0.5 100 2900 2 -02 33 rn 143-1-02 1 47 880 2 -02 33 rn 143-2-02 2 10 230 2 -02 33 rn 143-4-02 4 3.9 58 2 -02 33 rn 143-6-02 6 1.8 20 2 -02 33 rn 152-1-02 1 68 1300 2 -02 54 rn 152-2-02 2 18 350 2 -02 54 rn 152-4-02 4 6.8 87 2 -02 54 rn 152-6-02 6 3.9 41 2 -02 54 rn 152-8-02 8 2.7 22 2 -02 54 rn 152-10-02 10 1.8 14 2 -02 54 * replace the x by the desired housing style type 1 or 2. 1: choke horizontal 2: choke vertical test conditions: measuring frequency: 10 khz; 5 ma < 16h; 500a > 1 6h < 160h; 50a > 160h < 16mh; 50mv > 16mh < 160 mh inductance tolerance: +50%, -30% resistance tolerance: max. 15% @ 25 c; 20m, 1 a; > 20m 200m, 100ma; > 200m 2, 10ma electrical characteristics @ 25 c: 2c typical choke attenuation/resonance frequency chara cteristics per cispr 17; 50 /50 asym rn x02 rn x12 rn x14 rn x22 rn x42 rn 143 rn 152 emc/emi products schaffner group datasheets 2014 typical saturation characteristics inductance (typical value in %) vs. nominal current (a dc) rn x02 / rn x12 / rn x14 / rn x22 rn x42 / rn 143 / rn 152 mechanical data rn 102 rn 112, rn 114, rn 122, rn 142, rn 143 rn 202 rn 212, rn 214, rn 222, rn 242 rn 152 emc/emi products schaffner group datasheets 2014 dimensions rn 102 rn 112 rn 114 rn 122 rn 202 rn 212 rn 214 rn 222 rn 142 rn 143 rn 242 rn 152 tol. a 14 17.1 21.5 27 8.8 12.5 15.5 18 32.5 32.5 18 41.8 0.3 b 14 17.7 22.5 28 18.2 18 23 31 33.1 33.1 31 43 0.3 c 9 12.6 13.2 16.5 13.5 20 25 29.3 19.7 19.7 34.3 25 0.3 d 4 4 4 4 4.5 4 4 4 4.3 4.3 4.2 4.5 0.5 e 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.2 0. 1 f 2 2 1.5 2 g 10 10 12.5 15 5.08 10 12.5 15 20 20 15 15 0.2 h 10 15 20.1 25 15.21 15 10 12.5 30 30 12.5 40 0.2 i 4 8 l 12 12 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m please visit www.schaffner.com to find more details on filter co nnections. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
3 data sheet emc/emi chokes rn series current-compensated chokes rated currents from 0.3 to 10 a dc to 1khz frequency 100khz to 3mhz common-mode resonance frequency dual-choke configurations multiple pcb-mounting options technical specifications flammability corresponding to ul 94 v-0 high potential test voltage winding-to-housing @ 25c 4000 vac, 60 sec, guaranteed winding-to-winding @ 25c 1500 vac, 60 sec, guaranteed 1500 v, 50 hz, 2 sec, factory test maximum continuous operating voltage 250 vac mtbf @ 40c/230v (mil-hb-217f) > 5,000,000 hours operating frequency 50/60 hz rated currents 0.3 to 10 a @ 40 c max. surge current @ 10msec 20 x inominal @ 25c temperature range (operation and storage) -40 c to +125 c (40/125/56) approvals vde: excluding rn 102, rn 202 rn chokes are attenuating common-mode or asymmetric (p/n C> e) interference signals, by bein g connected in series with the phase and neutral line s of an ac powerline input. symmetrical components of the noise are also attenuated by the leakage inductance of the windings. these chokes are typically used in conjunction with suppression capacitors. features and benefits high saturation resistance and excellent thermal behavior through hole pin connections dual-choke configuration small compact design multiple housing options custom-specific versions are available on request typical applications phase-angle control circuits in combination with saturating chokes emi input filters for suppressing equipment with no earth connection suppressing high interference levels typical electrical schematic emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn x02-0.3-02 0.3 12 1275 2 -02 2 3 rn x02-0.6-02 0.6 4.4 385 2 -02 2 3 rn x02-1-02 1 3 205 2 -02 2 3 rn x02-1.5-02 1.5 1.6 100 2 -02 2 3 rn x02-2-02 2 1.1 70 2 -02 2 3 rn x12-0.4-02 0.4 39 1460 2 -02 5 6 rn x12-0.5-02 0.5 27 1250 2 -02 5 6 rn x12-0.6-02 0.6 15 465 2 -02 5 6 rn x12-0.8-02 0.8 10 370 2 -02 5 6 rn x12-1.2-02 1.2 6.8 245 2 -02 5 6 rn x12-1.5-02 1.5 3.3 135 2 -02 5 6 rn x12-2-02 2 1.8 75 2 -02 5 6 rn x12-4-02 4 0.7 27 2 -02 5 6 rn x14-0.3-02 0.3 47 1750 2 -02 9 12 rn x14-0.5-02 0.5 39 810 2 -02 9 12 rn x14-0.8-02 0.8 27 500 2 -02 9 12 rn x14-1-02 1 15 375 2 -02 9 12 rn x14-1.2-02 1.2 10 200 2 -02 9 12 rn x14-1.5-02 1.5 6.8 130 2 -02 9 12 rn x14-2-02 2 4.2 102 2 -02 9 12 rn x14-2.5-02 2.5 3.3 72 2 -02 9 12 rn x14-3-02 3 2 55 2 -02 9 12 rn x14-4-02 4 1.5 35 2 -02 9 12 rn x22-0.6-02 0.6 47 1180 2 -02 17 21 rn x22-0.8-02 0.8 39 1000 2 -02 17 21 rn x22-1-02 1 18 610 2 -02 17 21 rn x22-1.5-02 1.5 10 220 2 -02 17 21 rn x22-2-02 2 6.8 147 2 -02 17 21 rn x22-2.5-02 2.5 5.6 105 2 -02 17 21 rn x22-3-02 3 4.5 80 2 -02 17 21 rn x22-4-02 4 3.3 45 2 -02 17 21 rn x42-0.5-02 0.5 82 2700 2 -02 32 32 rn x42-1-02 1 33 810 2 -02 32 32 rn x42-1.4-02 1.4 27 500 2 -02 32 32 rn x42-2-02 2 6.8 190 2 -02 32 32 rn x42-4-02 4 3.3 66 2 -02 32 32 rn x42-6-02 6 1.8 20 2 -02 32 32 emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn 143-0.5-02 0.5 100 2900 2 -02 33 rn 143-1-02 1 47 880 2 -02 33 rn 143-2-02 2 10 230 2 -02 33 rn 143-4-02 4 3.9 58 2 -02 33 rn 143-6-02 6 1.8 20 2 -02 33 rn 152-1-02 1 68 1300 2 -02 54 rn 152-2-02 2 18 350 2 -02 54 rn 152-4-02 4 6.8 87 2 -02 54 rn 152-6-02 6 3.9 41 2 -02 54 rn 152-8-02 8 2.7 22 2 -02 54 rn 152-10-02 10 1.8 14 2 -02 54 * replace the x by the desired housing style type 1 or 2. 1: choke horizontal 2: choke vertical test conditions: measuring frequency: 10 khz; 5 ma < 16h; 500a > 1 6h < 160h; 50a > 160h < 16mh; 50mv > 16mh < 160 mh inductance tolerance: +50%, -30% resistance tolerance: max. 15% @ 25 c; 20m, 1 a; > 20m 200m, 100ma; > 200m 2, 10ma electrical characteristics @ 25 c: 2c typical choke attenuation/resonance frequency chara cteristics per cispr 17; 50 /50 asym rn x02 rn x12 rn x14 rn x22 rn x42 rn 143 rn 152 emc/emi products schaffner group datasheets 2014 typical saturation characteristics inductance (typical value in %) vs. nominal current (a dc) rn x02 / rn x12 / rn x14 / rn x22 rn x42 / rn 143 / rn 152 mechanical data rn 102 rn 112, rn 114, rn 122, rn 142, rn 143 rn 202 rn 212, rn 214, rn 222, rn 242 rn 152 emc/emi products schaffner group datasheets 2014 dimensions rn 102 rn 112 rn 114 rn 122 rn 202 rn 212 rn 214 rn 222 rn 142 rn 143 rn 242 rn 152 tol. a 14 17.1 21.5 27 8.8 12.5 15.5 18 32.5 32.5 18 41.8 0.3 b 14 17.7 22.5 28 18.2 18 23 31 33.1 33.1 31 43 0.3 c 9 12.6 13.2 16.5 13.5 20 25 29.3 19.7 19.7 34.3 25 0.3 d 4 4 4 4 4.5 4 4 4 4.3 4.3 4.2 4.5 0.5 e 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.2 0. 1 f 2 2 1.5 2 g 10 10 12.5 15 5.08 10 12.5 15 20 20 15 15 0.2 h 10 15 20.1 25 15.21 15 10 12.5 30 30 12.5 40 0.2 i 4 8 l 12 12 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m please visit www.schaffner.com to find more details on filter co nnections. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
4 data sheet emc/emi chokes rn series current-compensated chokes rated currents from 0.3 to 10 a dc to 1khz frequency 100khz to 3mhz common-mode resonance frequency dual-choke configurations multiple pcb-mounting options technical specifications flammability corresponding to ul 94 v-0 high potential test voltage winding-to-housing @ 25c 4000 vac, 60 sec, guaranteed winding-to-winding @ 25c 1500 vac, 60 sec, guaranteed 1500 v, 50 hz, 2 sec, factory test maximum continuous operating voltage 250 vac mtbf @ 40c/230v (mil-hb-217f) > 5,000,000 hours operating frequency 50/60 hz rated currents 0.3 to 10 a @ 40 c max. surge current @ 10msec 20 x inominal @ 25c temperature range (operation and storage) -40 c to +125 c (40/125/56) approvals vde: excluding rn 102, rn 202 rn chokes are attenuating common-mode or asymmetric (p/n C> e) interference signals, by bein g connected in series with the phase and neutral line s of an ac powerline input. symmetrical components of the noise are also attenuated by the leakage inductance of the windings. these chokes are typically used in conjunction with suppression capacitors. features and benefits high saturation resistance and excellent thermal behavior through hole pin connections dual-choke configuration small compact design multiple housing options custom-specific versions are available on request typical applications phase-angle control circuits in combination with saturating chokes emi input filters for suppressing equipment with no earth connection suppressing high interference levels typical electrical schematic emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn x02-0.3-02 0.3 12 1275 2 -02 2 3 rn x02-0.6-02 0.6 4.4 385 2 -02 2 3 rn x02-1-02 1 3 205 2 -02 2 3 rn x02-1.5-02 1.5 1.6 100 2 -02 2 3 rn x02-2-02 2 1.1 70 2 -02 2 3 rn x12-0.4-02 0.4 39 1460 2 -02 5 6 rn x12-0.5-02 0.5 27 1250 2 -02 5 6 rn x12-0.6-02 0.6 15 465 2 -02 5 6 rn x12-0.8-02 0.8 10 370 2 -02 5 6 rn x12-1.2-02 1.2 6.8 245 2 -02 5 6 rn x12-1.5-02 1.5 3.3 135 2 -02 5 6 rn x12-2-02 2 1.8 75 2 -02 5 6 rn x12-4-02 4 0.7 27 2 -02 5 6 rn x14-0.3-02 0.3 47 1750 2 -02 9 12 rn x14-0.5-02 0.5 39 810 2 -02 9 12 rn x14-0.8-02 0.8 27 500 2 -02 9 12 rn x14-1-02 1 15 375 2 -02 9 12 rn x14-1.2-02 1.2 10 200 2 -02 9 12 rn x14-1.5-02 1.5 6.8 130 2 -02 9 12 rn x14-2-02 2 4.2 102 2 -02 9 12 rn x14-2.5-02 2.5 3.3 72 2 -02 9 12 rn x14-3-02 3 2 55 2 -02 9 12 rn x14-4-02 4 1.5 35 2 -02 9 12 rn x22-0.6-02 0.6 47 1180 2 -02 17 21 rn x22-0.8-02 0.8 39 1000 2 -02 17 21 rn x22-1-02 1 18 610 2 -02 17 21 rn x22-1.5-02 1.5 10 220 2 -02 17 21 rn x22-2-02 2 6.8 147 2 -02 17 21 rn x22-2.5-02 2.5 5.6 105 2 -02 17 21 rn x22-3-02 3 4.5 80 2 -02 17 21 rn x22-4-02 4 3.3 45 2 -02 17 21 rn x42-0.5-02 0.5 82 2700 2 -02 32 32 rn x42-1-02 1 33 810 2 -02 32 32 rn x42-1.4-02 1.4 27 500 2 -02 32 32 rn x42-2-02 2 6.8 190 2 -02 32 32 rn x42-4-02 4 3.3 66 2 -02 32 32 rn x42-6-02 6 1.8 20 2 -02 32 32 emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn 143-0.5-02 0.5 100 2900 2 -02 33 rn 143-1-02 1 47 880 2 -02 33 rn 143-2-02 2 10 230 2 -02 33 rn 143-4-02 4 3.9 58 2 -02 33 rn 143-6-02 6 1.8 20 2 -02 33 rn 152-1-02 1 68 1300 2 -02 54 rn 152-2-02 2 18 350 2 -02 54 rn 152-4-02 4 6.8 87 2 -02 54 rn 152-6-02 6 3.9 41 2 -02 54 rn 152-8-02 8 2.7 22 2 -02 54 rn 152-10-02 10 1.8 14 2 -02 54 * replace the x by the desired housing style type 1 or 2. 1: choke horizontal 2: choke vertical test conditions: measuring frequency: 10 khz; 5 ma < 16h; 500a > 1 6h < 160h; 50a > 160h < 16mh; 50mv > 16mh < 160 mh inductance tolerance: +50%, -30% resistance tolerance: max. 15% @ 25 c; 20m, 1 a; > 20m 200m, 100ma; > 200m 2, 10ma electrical characteristics @ 25 c: 2c typical choke attenuation/resonance frequency chara cteristics per cispr 17; 50 /50 asym rn x02 rn x12 rn x14 rn x22 rn x42 rn 143 rn 152 emc/emi products schaffner group datasheets 2014 typical saturation characteristics inductance (typical value in %) vs. nominal current (a dc) rn x02 / rn x12 / rn x14 / rn x22 rn x42 / rn 143 / rn 152 mechanical data rn 102 rn 112, rn 114, rn 122, rn 142, rn 143 rn 202 rn 212, rn 214, rn 222, rn 242 rn 152 emc/emi products schaffner group datasheets 2014 dimensions rn 102 rn 112 rn 114 rn 122 rn 202 rn 212 rn 214 rn 222 rn 142 rn 143 rn 242 rn 152 tol. a 14 17.1 21.5 27 8.8 12.5 15.5 18 32.5 32.5 18 41.8 0.3 b 14 17.7 22.5 28 18.2 18 23 31 33.1 33.1 31 43 0.3 c 9 12.6 13.2 16.5 13.5 20 25 29.3 19.7 19.7 34.3 25 0.3 d 4 4 4 4 4.5 4 4 4 4.3 4.3 4.2 4.5 0.5 e 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.2 0. 1 f 2 2 1.5 2 g 10 10 12.5 15 5.08 10 12.5 15 20 20 15 15 0.2 h 10 15 20.1 25 15.21 15 10 12.5 30 30 12.5 40 0.2 i 4 8 l 12 12 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m please visit www.schaffner.com to find more details on filter co nnections. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
5 data sheet emc/emi chokes rn series current-compensated chokes rated currents from 0.3 to 10 a dc to 1khz frequency 100khz to 3mhz common-mode resonance frequency dual-choke configurations multiple pcb-mounting options technical specifications flammability corresponding to ul 94 v-0 high potential test voltage winding-to-housing @ 25c 4000 vac, 60 sec, guaranteed winding-to-winding @ 25c 1500 vac, 60 sec, guaranteed 1500 v, 50 hz, 2 sec, factory test maximum continuous operating voltage 250 vac mtbf @ 40c/230v (mil-hb-217f) > 5,000,000 hours operating frequency 50/60 hz rated currents 0.3 to 10 a @ 40 c max. surge current @ 10msec 20 x inominal @ 25c temperature range (operation and storage) -40 c to +125 c (40/125/56) approvals vde: excluding rn 102, rn 202 rn chokes are attenuating common-mode or asymmetric (p/n C> e) interference signals, by bein g connected in series with the phase and neutral line s of an ac powerline input. symmetrical components of the noise are also attenuated by the leakage inductance of the windings. these chokes are typically used in conjunction with suppression capacitors. features and benefits high saturation resistance and excellent thermal behavior through hole pin connections dual-choke configuration small compact design multiple housing options custom-specific versions are available on request typical applications phase-angle control circuits in combination with saturating chokes emi input filters for suppressing equipment with no earth connection suppressing high interference levels typical electrical schematic emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn x02-0.3-02 0.3 12 1275 2 -02 2 3 rn x02-0.6-02 0.6 4.4 385 2 -02 2 3 rn x02-1-02 1 3 205 2 -02 2 3 rn x02-1.5-02 1.5 1.6 100 2 -02 2 3 rn x02-2-02 2 1.1 70 2 -02 2 3 rn x12-0.4-02 0.4 39 1460 2 -02 5 6 rn x12-0.5-02 0.5 27 1250 2 -02 5 6 rn x12-0.6-02 0.6 15 465 2 -02 5 6 rn x12-0.8-02 0.8 10 370 2 -02 5 6 rn x12-1.2-02 1.2 6.8 245 2 -02 5 6 rn x12-1.5-02 1.5 3.3 135 2 -02 5 6 rn x12-2-02 2 1.8 75 2 -02 5 6 rn x12-4-02 4 0.7 27 2 -02 5 6 rn x14-0.3-02 0.3 47 1750 2 -02 9 12 rn x14-0.5-02 0.5 39 810 2 -02 9 12 rn x14-0.8-02 0.8 27 500 2 -02 9 12 rn x14-1-02 1 15 375 2 -02 9 12 rn x14-1.2-02 1.2 10 200 2 -02 9 12 rn x14-1.5-02 1.5 6.8 130 2 -02 9 12 rn x14-2-02 2 4.2 102 2 -02 9 12 rn x14-2.5-02 2.5 3.3 72 2 -02 9 12 rn x14-3-02 3 2 55 2 -02 9 12 rn x14-4-02 4 1.5 35 2 -02 9 12 rn x22-0.6-02 0.6 47 1180 2 -02 17 21 rn x22-0.8-02 0.8 39 1000 2 -02 17 21 rn x22-1-02 1 18 610 2 -02 17 21 rn x22-1.5-02 1.5 10 220 2 -02 17 21 rn x22-2-02 2 6.8 147 2 -02 17 21 rn x22-2.5-02 2.5 5.6 105 2 -02 17 21 rn x22-3-02 3 4.5 80 2 -02 17 21 rn x22-4-02 4 3.3 45 2 -02 17 21 rn x42-0.5-02 0.5 82 2700 2 -02 32 32 rn x42-1-02 1 33 810 2 -02 32 32 rn x42-1.4-02 1.4 27 500 2 -02 32 32 rn x42-2-02 2 6.8 190 2 -02 32 32 rn x42-4-02 4 3.3 66 2 -02 32 32 rn x42-6-02 6 1.8 20 2 -02 32 32 emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn 143-0.5-02 0.5 100 2900 2 -02 33 rn 143-1-02 1 47 880 2 -02 33 rn 143-2-02 2 10 230 2 -02 33 rn 143-4-02 4 3.9 58 2 -02 33 rn 143-6-02 6 1.8 20 2 -02 33 rn 152-1-02 1 68 1300 2 -02 54 rn 152-2-02 2 18 350 2 -02 54 rn 152-4-02 4 6.8 87 2 -02 54 rn 152-6-02 6 3.9 41 2 -02 54 rn 152-8-02 8 2.7 22 2 -02 54 rn 152-10-02 10 1.8 14 2 -02 54 * replace the x by the desired housing style type 1 or 2. 1: choke horizontal 2: choke vertical test conditions: measuring frequency: 10 khz; 5 ma < 16h; 500a > 1 6h < 160h; 50a > 160h < 16mh; 50mv > 16mh < 160 mh inductance tolerance: +50%, -30% resistance tolerance: max. 15% @ 25 c; 20m, 1 a; > 20m 200m, 100ma; > 200m 2, 10ma electrical characteristics @ 25 c: 2c typical choke attenuation/resonance frequency chara cteristics per cispr 17; 50 /50 asym rn x02 rn x12 rn x14 rn x22 rn x42 rn 143 rn 152 emc/emi products schaffner group datasheets 2014 typical saturation characteristics inductance (typical value in %) vs. nominal current (a dc) rn x02 / rn x12 / rn x14 / rn x22 rn x42 / rn 143 / rn 152 mechanical data rn 102 rn 112, rn 114, rn 122, rn 142, rn 143 rn 202 rn 212, rn 214, rn 222, rn 242 rn 152 emc/emi products schaffner group datasheets 2014 dimensions rn 102 rn 112 rn 114 rn 122 rn 202 rn 212 rn 214 rn 222 rn 142 rn 143 rn 242 rn 152 tol. a 14 17.1 21.5 27 8.8 12.5 15.5 18 32.5 32.5 18 41.8 0.3 b 14 17.7 22.5 28 18.2 18 23 31 33.1 33.1 31 43 0.3 c 9 12.6 13.2 16.5 13.5 20 25 29.3 19.7 19.7 34.3 25 0.3 d 4 4 4 4 4.5 4 4 4 4.3 4.3 4.2 4.5 0.5 e 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.2 0. 1 f 2 2 1.5 2 g 10 10 12.5 15 5.08 10 12.5 15 20 20 15 15 0.2 h 10 15 20.1 25 15.21 15 10 12.5 30 30 12.5 40 0.2 i 4 8 l 12 12 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m please visit www.schaffner.com to find more details on filter co nnections. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
6 data sheet emc/emi chokes rn series current-compensated chokes rated currents from 0.3 to 10 a dc to 1khz frequency 100khz to 3mhz common-mode resonance frequency dual-choke configurations multiple pcb-mounting options technical specifications flammability corresponding to ul 94 v-0 high potential test voltage winding-to-housing @ 25c 4000 vac, 60 sec, guaranteed winding-to-winding @ 25c 1500 vac, 60 sec, guaranteed 1500 v, 50 hz, 2 sec, factory test maximum continuous operating voltage 250 vac mtbf @ 40c/230v (mil-hb-217f) > 5,000,000 hours operating frequency 50/60 hz rated currents 0.3 to 10 a @ 40 c max. surge current @ 10msec 20 x inominal @ 25c temperature range (operation and storage) -40 c to +125 c (40/125/56) approvals vde: excluding rn 102, rn 202 rn chokes are attenuating common-mode or asymmetric (p/n C> e) interference signals, by bein g connected in series with the phase and neutral line s of an ac powerline input. symmetrical components of the noise are also attenuated by the leakage inductance of the windings. these chokes are typically used in conjunction with suppression capacitors. features and benefits high saturation resistance and excellent thermal behavior through hole pin connections dual-choke configuration small compact design multiple housing options custom-specific versions are available on request typical applications phase-angle control circuits in combination with saturating chokes emi input filters for suppressing equipment with no earth connection suppressing high interference levels typical electrical schematic emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn x02-0.3-02 0.3 12 1275 2 -02 2 3 rn x02-0.6-02 0.6 4.4 385 2 -02 2 3 rn x02-1-02 1 3 205 2 -02 2 3 rn x02-1.5-02 1.5 1.6 100 2 -02 2 3 rn x02-2-02 2 1.1 70 2 -02 2 3 rn x12-0.4-02 0.4 39 1460 2 -02 5 6 rn x12-0.5-02 0.5 27 1250 2 -02 5 6 rn x12-0.6-02 0.6 15 465 2 -02 5 6 rn x12-0.8-02 0.8 10 370 2 -02 5 6 rn x12-1.2-02 1.2 6.8 245 2 -02 5 6 rn x12-1.5-02 1.5 3.3 135 2 -02 5 6 rn x12-2-02 2 1.8 75 2 -02 5 6 rn x12-4-02 4 0.7 27 2 -02 5 6 rn x14-0.3-02 0.3 47 1750 2 -02 9 12 rn x14-0.5-02 0.5 39 810 2 -02 9 12 rn x14-0.8-02 0.8 27 500 2 -02 9 12 rn x14-1-02 1 15 375 2 -02 9 12 rn x14-1.2-02 1.2 10 200 2 -02 9 12 rn x14-1.5-02 1.5 6.8 130 2 -02 9 12 rn x14-2-02 2 4.2 102 2 -02 9 12 rn x14-2.5-02 2.5 3.3 72 2 -02 9 12 rn x14-3-02 3 2 55 2 -02 9 12 rn x14-4-02 4 1.5 35 2 -02 9 12 rn x22-0.6-02 0.6 47 1180 2 -02 17 21 rn x22-0.8-02 0.8 39 1000 2 -02 17 21 rn x22-1-02 1 18 610 2 -02 17 21 rn x22-1.5-02 1.5 10 220 2 -02 17 21 rn x22-2-02 2 6.8 147 2 -02 17 21 rn x22-2.5-02 2.5 5.6 105 2 -02 17 21 rn x22-3-02 3 4.5 80 2 -02 17 21 rn x22-4-02 4 3.3 45 2 -02 17 21 rn x42-0.5-02 0.5 82 2700 2 -02 32 32 rn x42-1-02 1 33 810 2 -02 32 32 rn x42-1.4-02 1.4 27 500 2 -02 32 32 rn x42-2-02 2 6.8 190 2 -02 32 32 rn x42-4-02 4 3.3 66 2 -02 32 32 rn x42-6-02 6 1.8 20 2 -02 32 32 emc/emi products schaffner group datasheets 2014 choke selection table choke* nominal current inductance resistance choke input/output weight @ 40 c l r configuration connections type 1 type 2 [a] [mh/path] [m/path] [qty] [g] [g] rn 143-0.5-02 0.5 100 2900 2 -02 33 rn 143-1-02 1 47 880 2 -02 33 rn 143-2-02 2 10 230 2 -02 33 rn 143-4-02 4 3.9 58 2 -02 33 rn 143-6-02 6 1.8 20 2 -02 33 rn 152-1-02 1 68 1300 2 -02 54 rn 152-2-02 2 18 350 2 -02 54 rn 152-4-02 4 6.8 87 2 -02 54 rn 152-6-02 6 3.9 41 2 -02 54 rn 152-8-02 8 2.7 22 2 -02 54 rn 152-10-02 10 1.8 14 2 -02 54 * replace the x by the desired housing style type 1 or 2. 1: choke horizontal 2: choke vertical test conditions: measuring frequency: 10 khz; 5 ma < 16h; 500a > 1 6h < 160h; 50a > 160h < 16mh; 50mv > 16mh < 160 mh inductance tolerance: +50%, -30% resistance tolerance: max. 15% @ 25 c; 20m, 1 a; > 20m 200m, 100ma; > 200m 2, 10ma electrical characteristics @ 25 c: 2c typical choke attenuation/resonance frequency chara cteristics per cispr 17; 50 /50 asym rn x02 rn x12 rn x14 rn x22 rn x42 rn 143 rn 152 emc/emi products schaffner group datasheets 2014 typical saturation characteristics inductance (typical value in %) vs. nominal current (a dc) rn x02 / rn x12 / rn x14 / rn x22 rn x42 / rn 143 / rn 152 mechanical data rn 102 rn 112, rn 114, rn 122, rn 142, rn 143 rn 202 rn 212, rn 214, rn 222, rn 242 rn 152 emc/emi products schaffner group datasheets 2014 dimensions rn 102 rn 112 rn 114 rn 122 rn 202 rn 212 rn 214 rn 222 rn 142 rn 143 rn 242 rn 152 tol. a 14 17.1 21.5 27 8.8 12.5 15.5 18 32.5 32.5 18 41.8 0.3 b 14 17.7 22.5 28 18.2 18 23 31 33.1 33.1 31 43 0.3 c 9 12.6 13.2 16.5 13.5 20 25 29.3 19.7 19.7 34.3 25 0.3 d 4 4 4 4 4.5 4 4 4 4.3 4.3 4.2 4.5 0.5 e 0.6 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.2 0. 1 f 2 2 1.5 2 g 10 10 12.5 15 5.08 10 12.5 15 20 20 15 15 0.2 h 10 15 20.1 25 15.21 15 10 12.5 30 30 12.5 40 0.2 i 4 8 l 12 12 all dimensions in mm; 1 inch = 25.4 mm tolerances according: iso 2768-m / en 22768-m please visit www.schaffner.com to find more details on filter co nnections. emc/emi products schaffner group datasheets 2014 headquarters, global innovation and development center switzerland schaffner group nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 630 info@schaffner.com http://www.schaffner.com to nd your local partner within scha?ners global network: www.schaffner.com ? 2014 schaffner group the content of this document has been carefully checked and understood. however, neither scha?ner nor its subsidiaries assume any liability whatsoever for any errors or inaccuracies of this document and the consequences thereof. published specica- tions are subject to change without notice. product suitability for any area of application must ultimately be determined by the customer. in all cases, products must never be operated outside their published specications. scha?ner does not guarantee the availability of all published products. this disclaimer shall be governed by substantive swiss law and resulting disputes shall be settled by the courts at the place of business of scha?ner holding ag. latest publications and a complete disclaimer can be downloa- ded from the scha?ner website. all trademarks recognized. sales and application centers china schaffner emc ltd. shanghai t20-3, no 565 chuangye road pudong new area 201201 shanghai t +86 21 3813 9500 f +86 21 3813 9501 / 02 cschina@schaffner.com http://www.schaffner.com.cn/ finland schaffner oy sauvonrinne 19 h 08500 lohja t +358 19 35 72 71 finlandsales@schaffner.com france schaffner emc s.a.s. 112, quai de bezons bo?te postale 133 95103 argenteuil t +33 1 34 34 30 60 f +33 1 39 47 02 28 francesales@schaffner.com germany schaffner deutschland gmbh schoemperlenstrasse 12b 76185 karlsruhe t +49 721 56910 f +49 721 569110 germanysales@schaffner.com italy schaffner emc s.r.l. via galileo galilei 47 20092 cinisello balsamo (mi) t +39 02 66 04 30 45/47 f +39 02 61 23 943 italysales@schaffner.com japan schaffner emc k.k. 1-32-12, kamiuma, setagaya-ku 7f mitsui-seimei sangenjaya bldg. 154-0011 tokyo t +81 3 5712 3650 f +81 3 5712 3651 japansales@schaffner.com http://www.schaffner.jp singapore schaffner emc pte ltd. blk 3015a ubi road 1 05-09 kampong ubi industrial estate 408705 singapore t +65 6377 3283 f +65 6377 3281 singaporesales@schaffner.com spain schaffner emc espa?a calle calndula 93 miniparc iii, edificio e el soto de la moraleja alcobendas 28109 madrid t +34 618 176 133 spainsales@schaffner.com sweden schaffner emc ab turebergstorg 1, 6 19147 sollentuna t +46 8 5792 1121 / 22 f +46 8 92 96 90 swedensales@schaffner.com switzerland schaffner emv ag nordstrasse 11 4542 luterbach t +41 32 6816 626 f +41 32 6816 641 sales@schaffner.ch taiwan r.o.c. schaffner emv ltd. 6 floor, no. 413 rui guang road 114 neihu district taipei city t +886 2 87525050 f +886 2 87518086 taiwansales@schaffner.com thailand schaffner emc co. ltd. northern region industrial estate 67 moo 4 tambon ban klang amphur muangg p.o. box 14 51000 lamphun t +66 53 58 11 04 f +66 53 58 10 19 thailandsales@schaffner.com uk schaffner ltd. 5 ashville way molly millars lane wokingham rg41 2pl berkshire t +44 118 9770070 f +44 118 9792969 uksales@schaffner.com http://www.schaffner.uk.com usa schaffner emc inc. 52 mayfield avenue 08837 edison, new jersey t +1 800 367 5566 t +1 732 225 9533 f +1 732 225 4789 usasales@schaffner.com http://www.schaffner.com/us schaffner mtc llc 6722 thirlane road 24019 roanoke, virginia t +1 276 228 7943 f +1 276 228 7953 http://www.schaffner-mtc.com schaffner trenco llc 2550 brookpark road 44134 cleveland, ohio t +1 216 741 5282 f +1 216 741 4860 www.schaffner-trenco.com
|
